Application as

• Backstop

for installations with low speeds. The freewheels are designed for the use in inclined conveyor-belts, elevators or pumps. Taconite seals protect the freewheels from contamination with dust or dirt.

Features

Low Speed Backstops FRHM with torque arm are sealed sprag freewheels with ball bearings. They are designed for interchanging the Morse® CB units, supplied oil-filled and ready for installation.

The Low Speed Backstops FRHM are arranged on through shafts or shaft ends.

Maximum torques up to 56 000 lb-ft.

Bores up to 7 inch.